Export of 209AA Materials to Russia

The export of 209AA materials to Russia is one of the services of Afshin Karami Trading Group, and if you intend to be active in the field of exporting polymer materials, you must first be relatively familiar with the product’s characteristics, so in the continuation of this article, you will be informed about how to export 209AA materials. We provide information about Russia, the features and use of this product, so stay with us until the end of the article.

Linear Low Density Polyethylene

Linear low polyethylene has a high resistance to chemicals and in addition to high strength, it also has a lot of flexibility and has a suitable resistance to water vapor and alcohol. This material is a linear polymer with short branches and compared to LDPE, it has higher tensile strength, higher impact resistance and greater puncture resistance.

The density of LLDPE materials is reported between 0.915-0.930 grams per cubic centimeter. There are different grades of linear low polyethylene based on the type of use and their film or injection use.

Advantages of Linear Low Density Polyethylene LLDPE

The use of this branch of polyethylenes has various advantages, for example, high resistance to chemicals, good resistance to water vapor and alcohol, flexible and at the same time high strength are among these advantages.

Linear Low Density Polyethylene LL209AA

209AA materials, like other linear low polyethylenes, have a low density. Polyethylene grades are divided into three general categories according to density: linear low polyethylene LLDPE, low polyethylene LDPE and high density polyethylene HDPE. Of course, there are other types of divisions, but the most common division is the one mentioned.

LL209AA materials are placed in the category of linear low polyethylenes, which have the lowest density among the three mentioned categories. These materials have various properties such as high tensile strength and appropriate impact resistance. These materials are transparent with the appearance of granules and have better sealing. The molecular arrangement in 209AA materials is linear, which makes it suitable for the production of plastic films such as freezer bags.

Polyethylene material 209AA has good sewing ability and is considered a copolymer containing antioxidants, which is recommended for general applications.

The applications that are usually suggested for LL209AA grade are in the field of general use film, stretch film, high density duty film, agricultural film. The processes that are suitable for this grade are in the form of blown film. This grade has good temperature performance and is impervious to water and moisture. Transparency and clarity is also another characteristic of it.

Price and Purchase of 209AA

Petrochemicals that produce LL209AA materials produce and supply these materials in virgin or compound form with other ethylene polymers, so the price of these materials is different, and of course, the changes in global, currency prices and the prevailing market atmosphere should not be ignored, because these factors also play an important role in determining the price of polymers. Despite such different and variable factors that exist in the market, buyers and traders are facing problems in distinguishing real and unreal prices.

Irplastics company, with several years of brilliant experience and one of the main suppliers of polymer materials and types of polyethylene, offers its services to our dear customers to inquire about the updated price and supply the original and first-class fit grade LLDPE 209AA. You can contact our experts to buy and inquire about the real and updated price of LLDPE 209AA grade.

Today, the applications of polyethylene are very diverse and wide. Therefore, the production of new polymer products is also increasing. For this reason, different polyethylene grades have given special properties to each of the polymer products and all kinds of plastic products. LLDPE 209 AA grade is a low polyethylene with a density between 0.915-0.925 g/cm, which is made through copolymerization with alpha olefins (short chain 1-butene, 1-hexene and 1-octene).

In addition to producing bags and sheets, this grade can be used to make sheathed cables, pipes, containers, etc. According to the application, the special properties of this grade (stiffness, flexibility and transparency and resistance to impact and puncture) have made this material valuable in terms of price and efficiency for businessmen and economic activists in this field.

Borders of Iran and Russia

One of the problems and deficiencies that can be seen in Iran’s trade route with Russia is the lack of business knowledge of economic and market players in the field of trade with Russia. This lack of knowledge and understanding of this potential market with high potential has caused a very small share of the huge profit in this market for Iranian businessmen, and despite these conditions, in case of exporting to Russia, businessmen also incur a lot of extra costs.

Irplastics company, one of the pioneers in the field of providing and supplying polymer materials and plastic raw materials, has been able to have many customers and buyers inside and outside the country. Because this company offers a high-quality product to its customers. Therefore, applicants can reduce their costs and earn more profit at an affordable price.

The export of grade 209AA is done in a high and varied volume due to its various applications. Also, this linear low polyethylene is used in the production of various products and has been welcomed due to the variety of applications and the various advantages of using these raw materials.

Nowadays, people can use different methods to transfer their goods to Russia according to their conditions and needs. We will describe them below.

The land method is one of the methods of transfer to Russia, which is done by two methods, rail and transit. In the rail method, the desired cargo is transported by the rail borders of Astara, Sarakhs and Inche Borun. On the way of transit, it should be transported from the border of Bazargan and Kazakhstan-Azerbaijan in a fixed manner and with the desired truckload, which has a lower cost than other methods.

The air method is another method that is mainly used for commercial loads weighing less than one ton, which is not used in the field of polymers and generally has few fans.

The sea method is also carried out in the south and north of Iran, so that in the north of Iran it is possible from Anzali Port, Nowshahr Port, Fereydon Shahr Port and Astara, and in the south of the country it can be done through Bandar Abbas, Chabahar, Bushehr and Imam Port. Iranian traders and merchants mostly choose the land and sea method to transfer their goods to Russia.

Term of Export to Russia

Legislators in Russia, like other countries, put obstacles for importers in this country, and these obstacles and laws are more for some countries, such as American countries. Of course, fortunately, Iran is not included in this list, and it has been included in the rules only to the extent of the usual customs laws of any country.

Considering the favorable political and economic conditions between the two countries of Iran and Russia, this country is considered one of the most important export destinations for Iran, but due to the lack of planning and identification of target markets in other countries, Russia is neglected as a virgin and potential market.

Irplastics company, one of the pioneers in the field of providing and supplying polymer materials and plastic raw materials, has been able to have many customers and buyers inside and outside the country. Because this company offers a high-quality product to its customers. Therefore, applicants can reduce their costs and earn more profit at an affordable price.

You can contact our company in the Afshin Karami Trading Group to buy and prepare the best polymer materials and plastic raw materials at a reasonable and competitive price, or to receive any advice on the export of 209AA materials to Russia. Our experts and consultants will respond as soon as possible.

Leave a Comment

Your email address will not be published. Required fields are marked *